Shree Safety Services

Designed to absorb, deflect and minimize the extent of wear, abrasion and impact from wheeled traffic such as trolley, carts and vehicle, heavy-duty wall and corner profiles offers cost-effective protection for walls, corners and columns in busy assembly and access areas.

Size. - 1000*200*10MM

Size. - 1000*200*10MM

Rubber Cable Protector

    It is made out of rubber material

    It is used to protect the cable or hoses

    Colour: Black

    Make: S-Safe

    Size: 900mm x 500mm x 55mm

Cable protector are used for all indoor and outdoor or at factory premises where heavy cable are placed. Depand on cable dia and number of cable we use 1,2,3,4,5 as per client needs.

Model No. - SI-PFS-PLASTIC FLOOR STAND

HEIGHT � 600MM

WEIGHT - 800KG

WE CAN CUSTOMIZE AN PRINTING ON PLASTIC FLOOR STAND AS PER YOUR REQUIREMENT, PLASTIC FLOOR STAND ALSO AVAILABLE PLAIN WITHOUT ANY PRINTING

Car Stoppers prevent cars from pulling too far into residential or commercial parking spaces and visibly mark each parking space. These car stoppers prevent vehicles from damaging sidewalks, buildings, curbs, and landscaping. In addition to parking lots and outdoor parking spaces, our car stoppers may also be used in garages to prevent the driver from pulling too far forward.

Features:

• Made out of rubber material
• Size: 350mm x 250mm x 50mm or 500mm x 370mm x 75mm
• Colour: yellow & black
• Comes with reflective bead for night reflection

PLASTIC ROAD STUD DOUBLE SHANK 

Specification

• Application : Used for marking road banks / Road Centre Critical Crossings Junctions / Walkways.
• Material : Acrylic Reflector and Aluminium frame with mix epoxy filler.
• Specification : 115mm x 100mm x 25mm
• Colour : Red
• Packing : 1 units per box
• Installation : Drilling and fitting with bolt or by putting adhesive chemical.
• Additional Feature : Flashing / Working time after fully charged: flashing=70hrs.
• Load Bearing Capacity : N/A
• Additional Accessories : N/A
• Imported / Manufacture : Imported

Select ProductPlastic Road StudsSolar Road Studs

• Accurate dimensions
• Lightweight
• Precisely designed

• Full Dome mirrors are made of High-Grade Reflective mirrors and used mainly in the warehouse and industrial plants
• Full Dome Mirrors are hanged on the ceilings for better visibility of the vehicles /Forklifts coming from different directions
• Specifications:

• • Made out Polycarbonate Material

  • Sizes : 18/24/26/32/36 Inches

  • Uses: Malls, Theater, Hotels, etc

The Arrow Speed Bumps are designed for heavy traffic roads in High-Class Market. The wide body yellow rubber section and white allow reflector provide maximal visibility to driver in the day and night.

Description

Rubber Speed Breakers – 

Size : 500x400x75mm

• Made out of polycarbonate material
• Bracket is made of abs plastic
• Comes without pole & for outdoor purpose

• Size: 18”, 24”, 32” & 40”

• Application : Used as temporary lane separator / temporary barrier / zone closure mostly outdoors.
• Material : PU flexible plastic with Dual sticker engineering grade
• Weight : 3 kg
• Specification : Height – 710cm / Base – 38cm
• Colour : PU orange
• Packing : 5 pc per woven Bag
• Installation : Ready to use
• Additional Feature : N/A
• Load Bearing Capacity : N/A
• Additional Accessories : N/A
• Imported / Manufacture : Imported

Shape Rubber Corner Guards                      

Specifications:-

Size: 1200mm X 110 X 110

Size: 800mm X 110 X 110 

• Colour: Black with Yellow or White Reflective Stickers
• Body Material: Modified Thermoplastics (Polymer Rubberized)

RUBBER SPEED BREAKERS or SPEED HUMPS

It is one of the widely-used speed slowing products, which is mainly seen in Residential & Commercial complexes such as at the crossings of Cities, Highway, Toll gates, Parking lots, Petrol Pumps, etc. Its combination of yellow and black colour draws the drivers'' attention at both day and night effectively by achieving more result of slowing. Available in 2 heights : 50mm & 75mm (Black & Yellow Combination)Some of the other details are as follows:

Middle: 350 W X 500 L X 50 H

End Cap: 350W X 250 L X 50 H

Make S-Safe

Model No. - SI-TBL-1-TRAFFIC BATON LIGHT-1

PIPE- PVC

HANDLE- ABS

DIAMETER - 4CM

LENGTH- 54CM

NO. OF LED- 12

COLOUR- RED/GREEN

FUNCTION - RED BLINKING, RED STABLE, GREEN STABLE

BATTERY - TWO D BATTERY

• Compact look
• Easy to move
• Stable and robust

Specifications:

• Model No: H2-SU309
• Model No: H2-SU311-5
• Model No. H2-SU309 H2-SU311-5
• Solar Flasher H2-SU309 Series is new innovative solar safety light, it comes with amazing useful accessories which can
• Apply in most of the situation.
• Solar Flasher H2-SU311 is new innovative Solar Safety Light different from H2-SU309 having lots of functions.
• Options of solar as well as handy rechargeable in case of no sunlight.
• Size 22.5cm(H)X18cm(D) 23.2cm(H)X18cm(D)
• Material Frame: PP, Shell: AS Frame: ABS, Shell: PC
• Led's 4pcs 9pc
• Photo Control Yes Yes
• Function Flash-Steady-Close Multifunction
• 360Degree Swivel Head Yes Yes
• Lens Double Single

L Shape Jersey Barricades

We are engaged in offering effective and safe barricading with our Plastic Road Barriers. These portable road barriers are preferred over drums, posts, cones, and other products. We make use of high-quality non-fading UV stabilized polymer in the production in order to ensure that these road barriers are resistant to heavy impacts. Further, these are flexible enough to align in straight lines or in curves.

Applications:

• Lane delineation, Diversion of traffic
• Crowd control
• Parking lots
• Toll booths
• Police and other security purposes
• Temporary hazards, closures

SPECIFICATIONS

SW-BR-1 : L: 1000mm x W: 500mm x H: 800mm, Water Ballast - 20 ltrs.

SW-BR-2 : L: 1500mm x W: 400mm x H: 950mm, Water Ballast - 50 ltrs.

SW-BR-3 : L: 1600mm x W: 650mm x H: 950mm, Water Ballast - 60 ltrs.

Water Filled BARRICADES

 Barricades is one-step mouled, anti-sunburn, anti-impact and not easy to age. When filled with water/sand, the road barrier will be more flexible & if without water, it is easy to move.This product is suitable for entries of expressways, turnings of the roads and the tollgates, reminding the drivers to slow down.

Size 2000x1000x580mm with interlocking

• This unique innovation is a 3 piece detachable barricade.
• These plastic Barricades are made out of high-quality premium grade UV Stabilized Virgin Polyethylene material.
• BDIs unique design and well-engineered barricades facilitate easy handling and are very easy to install/fit. All the more, they are detachable which enables fitting more number of barricades in small storage spaces.
• The barricades have provision for filling sand/water.
• This barricade has been designed to withstand the high wind pressure generated by fast-moving vehicles.
• These high-quality barricades dont rust, chip or peel making it completely maintenance free.
• These barricades have provisions for putting advertisements, logos, cautionary signs, direction arrows, etc. as desired by the customer.
• Strips of retro-reflective sheets can also be pasted on the barricade to help enhance night vision.
• The sizes available are:- 2000mm Length x 1200mm Height

Model No. - 2-QUEUE MANAGER-2

MATERIAL - SS 202 GRADE

HEIGHT - 910MM

WEIGHT - 8KG

BASE - 320*320MM

BELT LENGTH - 2MTRx2

DIAMETER OF POLE- 63MM

• Specifications
• Feature

Foldable & Expandable Barrier
Material –MS

Tough MS construction safety barrier

Size-2mtr x 1.2 mtr

Male and female attachments for multiple barriers

Quality epoxy paint finish

Assembly for feet only (spanner required)

It is flexible expandable from 300 mm to 2750 mm. long life

Color- Red  & Yellow

Knuffi Corner Protection

• Product description

  Knuffi warning and protective bumper guards act as a buffer zone for people, machines and objects; absorbing hard impacts and preventing injury and damage. Injury to personnel and downtime due to repairs can be a thing of the past. Knuffi performs well in temperatures from -40 to +212 degree F and includes durable acrylic adhesive that is aging resistant making them versatile for both indoors and outdoors, i.e., high traffic areas, hallways, corridors, machinery, forklifts, shelves and much more. Type A corner bumper has a 90 degree cut-out ideal for corners and other right angle surfaces. Includes 2 self-adhesive strips. Profile body: recyclable polyurethane foam, completely free of CFCs. Surface: polyurethane foam colored by reverse printing and foamed in place so that no paint appears on the outside. Adhesive: Installed using light and ageing resistant, modified acrylic glue. Adhesion: 21N/inch (25-millimeters). Fire Classification: B2 according to DIN 4102 and UL 94HB/10mm. Installation: Simply adhere to clean, grease-free surface. Corner protection A: 0.98-inches.

Stanchion Post, Sign Stand, Screen Sign Stand Are Basically Used At Airports, Hotels, Hospitals, Malls, Cinema Halls, Counters, Etc. For Queue Management And Displaying Useful Information To Customers.
Model

These stanchion post are useful at Malls, Hospitals, Airports etc.

Model No. - SI-TBL-2-TRAFFIC BATON LIGHT-2

PIPE- PVC

HANDLE- ABS

DIAMETER - 4CM

LENGTH- 54CM

NO. OF LED- 12

COLOUR- RED/GREEN

FUNCTION - RED BLINKING, RED STABLE, GREEN STABLE

A wheel clamp, also known as wheel boot, parking boot, or Denver boot, is a device that is designed to prevent motor vehicles from being moved.

We have gained expertise in offering genuine quality 2 Mtr Water Fillable Barricade to the customers. The entire range is designed as well as manufactured in compliance with the international quality standards. In addition to this, we check these sand crash barriers on certain well-defined parameters to gauge their defect-free nature.

Some of the features are as follows :

• Perfect shape & design
• Longer life
• Excellent visibility

• Application : Used to ensure smooth water flow by passing hose pipe through channels and avoid being pressed by pedestrians / moving vehicles
• Material : Rubber (Natural and Reclaimed)
• Channel : HR 3 HR 4
• Dimension : L838 X W300 X H89 L838 X W300 X H101
• Weight : 12 14
• Colour : Black with yellow reflective stripes
• Packing : 1 units per woven bag
• Installation : Ready to use
• Additional Feature : N/A
• Load Bearing Capacity : N/A
• Imported / Manufacture : Made In India

• End Caps can be ordered separately
• A Low cost high efficiency product
• Usable under all weather conditions without maintenance
• Can be installed in recessed as well as continuous pattern
• Reflective surface with black and yellow stripes to ensure maximum visibility
• Durable for long term use
• Smooth finish

Model No. - SI-PCMP-PLASTIC CONE MESSAGE PLATE

MATERIAL- HIGH QUALITY PLASTIC

SHAPE - RECTANGULAR

EASY TO FIT ON ANY CONE AND YOU CAN PUT ANY MESSAGE

Model No. - SI-WL-WHEEL LOCK

MATERIAL - MS

HANDLE - PVC COATING

WEIGHT - 2.5KG

NO. OF KEYS - 2

• Application : Avoids road accidents by improving visibility of pavements & medians in low light conditions.
• Material : Plastic & Retro reflective Prismatic Sheeting
• Specification : 175mm Height x 125mm Width
• Colour : High Visibility Yellow & Black
• Packing : 50 nos per box
• Installation : Wet concrete insertion
• Imported / Manufacture :

F

Model No. - SI-QM-3-QUEUE MANAGER-3

HEIGHT - 950MM

BASE - 320*320MM

DIAMETER OF POLE- 51MM

COLOUR - GOLDEN/SILVER

We have first time in India developed New Plastic wheel chocks which Confirm to DIN 76051-53 Specifications.
The Plastic Wheel chock is according to norm DIN 76051 “Chocks for motor vehicles, semitrailers, and towings” (Version November 1992)
Length = 470 mm = 18.50”, Breadth = 200mm = 8.00”, Height = 230mm = 9”
Injection Molded from durable U.V. stabilized and chemical resistant plastic this wheel chock is both tough and lightweight (2.200 to 2.300 Kgs. Chock only). The Chock comes with ergonomically Molded-in built the handle. The Wheel chock also has provision for fitting i.e. simply fixing it to truck or trailer bodies to ensure the chock is always on hand when required.

L Shape Type Wheel Chock

To be used for Heavy duty truck, HGV, off highway vehicles, GPU Units. Jet Starters, Carts, Air-conditioning Unit, Ground Support Equipment''s
·         Rubber composition: 70% - 80% natural rubber + additives.
·         Dimensions: 9.50" x 6.50" x 7.0" 241 mm x 165 mm X 178 mm
Approximate weight: 5.25 to 5.50 kg

• Application : Used as a lane separator / creating walkways.
• Material : PU flexible plastic with high reflective tape.
• Weight : 1.3 kg
• Specification : 750 x 20mm
• Colour : PU Orange
• Packing : 16 pc per box
• Installation : Drill and Fit using Screws.
• Additional Feature : N/A
• Load Bearing Capacity : N/A
• Additional Accessories : N/A
• Imported / Manufacture : Currently Imported