Body Protection Suits

Product Details:

Product Specification

We offer red fort work wear fire entry suit that have High level protection and high comfort using proper membrane fabrics and respirators for the fire extinguishing purpose.

• The suit shall be suitable for human height from 165 cms to 17 cms.
• The fire entry suit should be made of 9 Layers of specialized aluminized para-aramide fabrics and other insulation fabrics.
• The suit also be composed of uninflammable polyrentene membrane. The inner isolated part of the suit should be stitched with Nomex and Aramid felt fabric. The combination of polyurethane fabric along with Aramid felt shields in filtrations of liquids into the suits and enables to check away the steam out of the suit. The polyurethane membrane should not allow the outside heat to enter the body premises.
• The suit shall be a two piece item covering complete human body consisting of hood integrated with the Coat as one piece and a trouser having harness belt with shoulder straps. The suit shall be capable of being used over normal clothes.

The entire suit should be made of the fabric assembly as mentioned above. The full detailed features of the garment should be as below :

• Coat with Hood should be sewed fastly together. The hood should have visor with golden reflexive and unsweaty modification, double protective glass, double fastening, metal zip and Velcro being located into the are of hood, which enables a very comfortable wearing and putting up and down. The coat should have a provision of wearing a breathing apparatus.
• Trousers should be having regular braces, the belt for making the waist slimmer in the lower parts of trouser, a metal zip for more comfortable putting up the shoes on the feet.
• Leggings - Steel in lay on the in step, the lower steel support for fasting the shoes and protecting against getting up the leggings.
• Gloves - 5 fingers with membrane against liquid at the wrist with knitting, to use over where over the gloves for protection against heat.
• Shoes, Overcoat - The shoe should have back side double fasting, metal zip and Velcro fasting belt for shoe inside the aluminised overcoat.

The entire fire entry suit should be provided with gloves, leggings, shoe overcoat and breathing apparatus pouch. The suit shall be having enough space to accommodate inside a self-contained breathing apparatus in complete protected manner. The weight of total suit shall not be more than 8 kgs. The entire suit should be certified as per EN 1486 standards and should achieve level III with the weight not exceeding more than 8 Kgs. Shelf life (shall not be less than 5 years under specified storage conditions). Operations, maintenance, storage and cleaning guidelines along with the catalogues / booklets / video. Precautions to use the suit and the conditions under which the suit is not be used. Vendor to provide label on his suit as per EN 1486 – Level III. The vendor shall submit the copy of the certificate from the approved certifying agency clearly stating that the suit is meeting all EN 1486 and the vendor is authorized to use the lable / mark from the certifying agency (e.g. UL) or any other reputed International organization in this regard. Additionally, vendor must also certify the compliance w.r.t. additional specifications given here.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Description

Salisbury PRO-WEAR Arc Flash Personal Protection Equi pment Kits are available in an ATPV rating of 31 cal /cm2. This kit contains an arc flash coat, bib overalls, PRO-HOOD, hard hat, SKBAG and safety glasses.

These kit meets NFPA 70E Hazard risk Category 3.

Product numbering chart for 31 Cal/Cm2 ppe kit

Salisbury PRO-WEAR Arc Flash Personal Protection Equi pment Kits are available in an ATPV rating of 55 and 75 cal /cm2. This kit contains an arc flash coat, bib overalls, PRO-HOOD, hard hat, SKBAG and safety glasses.

These kit meets NFPA 70E Hazard risk Category 4.

Product numbering chart for 55 Cal/Cm2 and 75 cal /cm2 ppe kit

 

Salisbury PRO-WEAR Arc Flash Personal Protection Equi pment Kits are available in an ATPV rating of 100 cal /cm2. This kit contains an arc flash coat, bib overalls, PRO-HOOD, hard hat, SKBAG and safety glasses.Made from TUFFWELD which offers inherent arc rated protection with a high level of comfort and durability. Exceptional light weight comfort with superbwicking so you can stay cooler and drier even under demanding conditions

These kit meets NFPA 70E Hazard risk Category 4.

Product numbering chart for 100 Cal/Cm2 ppe kit

 

Important: NFPA 70E does not have a Hazard Risk Category above 40 cal/cm2.

Working on levels above 40 cal/cm2 should be avoided because of the blast hazards caused byarc flash.

Product Details:

tandards : CE EN469/EN340

Outer fabric : 93% Meta Aramid 200gsm, 5% Para Aramid, 2% Antistatic

Moisture : 50% ARAMID/50% viscose coated PTFE membrane.

Thermal : Carbon felt laminate with 50 % ARAMID 50% viscose comfortable face cloth.

Specification :
1. Double cloase fly front, Velcro fixing device and safety zipper.
2. Throat safeguard design Adjust by Velcro
3. Double supper large pocket on the coat and Trousers, one radio pockets on the chest and a Concealed paper pocket between double close fronts.
4. Cuff can be adjusted by Velcro and with fireproof, waterproof and thumb ring design.
5.Extra patches shall be placed at elbows jacket''for extra resistant to abrasion.
6.The reflector bands shall be sewed as rounded to the cuffs, foot, chest and the back parts of the jackets.
7.Overlapping of Jacket over Trousers 30 cms.
8.Elastic girdle and Elastic suspenders shall easily opening & lock Adjustable clipsprovided.
9.The sewing thread shall be meta arami.

Size : S-XXL

Available Color : Navy Blue

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Product Specification Product DescriptionFeatures:

• Single piece of safety suit, hand gloves, safety shoes.
• Upper kevlar cloth and inner side woolen thermal lining.
• Complete set will be stiched with heat resistant thermal lining.
• Quality good.

Product Details:

Product Specification

We are engaged into offering fire proximity suit with following specifications :

• Made from aluminized glass fiber cloth with vapor / moisture / woolen / FR / heat resistance lining .
• Stitched with "KEVLAR" thread consists of hood , visor and firemen helmet.
• Proximity suits comes with coat, pant, gloves, hood & shoes.
• Shoes are with oil and heat resistant sole.
• Gloves are with insulation.
• The aluminized fabric tests in accordance with EN 531:1995 + A1:1998-07
• Suitable for proximity fire Industrial radiant heat up to 1500°C
• Applicable in foundries, power plants, cement, steel manufacturing, etc.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

We Are leading manufacturer and supplier of cold storage suit.

 

Features:

• The suit consists of Coverall or Jacket Trouser, Hood Gloves
• Suitable for temperature up to - 60-degree Centigrade
• Designed for comfort protection for cold storage workers
• Wind and tear resistant, as well as water repellent.

 

Application:

• In walk-in coolers, dairy froze food processing and was ever cold weather protective insulated thermal clothing is needed.

Certifications: 

• Testing was done from IRMA (NABL Accredited Laboratory). 
• Tested in an environment of (-60^oC.) for a period of 3 hrs. when a person wearing our suit is at 29^oC. which is a normal atmospheric temperature in India.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Delivery Time: ready ex-stock

Product Details:

• PP Non-Woven Fabric (30gsm)
• Breathable film (30gsm)
• Glue (3gsm)
• Level-2 as per ANSI/AAMI PB70 Barrier Performance.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

DuPont Tychem C suit is a hooded coverall & chemical protective clothing.

• Case of 25
• Colour: bright yellow for high visibility
• Size: S-XXXL
• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents)
• EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up.
• Model CHA5
• Special item - Please contact for lead times

Product Details:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Dupont Tychem F" Chemical Protection Suits

Body Suit is made from polyethylene Fibers thik Laminated with polyethylene
Fabric is of 90 GSMAll stitched part are sealed with seam sealing tape
Chain is double flapped and flapped are done with special adhesive
The style of garment is one peice yellow colour
Entire garments can be cleaned and disinfected with sodium hypochlorite 1-4% solutions

Product Details:

• Made from heavy duty laminated / non laminated Bright Yellow colour PVC material which is leak proof also.
• Available with and without lining
• Acid / Alkali proof and very ideal for sanitisation, pest control purpose. 
• It consists of Hood, Visor (replaceable) free size Pant and Coat with either zip or button and also available in Boiler Suit style.
• Special air breather at back and arm with flap which gives protection and air circulation.
• Also available are PVC Shoe Cover, Apron, Sleeves , Head Cap.

Note:The prices and photos mentioned are indicative. Price will vary according to model, brand, specification, quantity, stock availability, location, size and customization in products.

Can be used for 

Sanitisation purpose
pest control 
office disinfect purpose

Size: one size fits all

Colour: Yellow

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Cryo-Apron (Tempshield)Quick Info

• • Protection from Splashes and Contact Cold
  • Cryogenic protection for ultra-cold applications upto -196degree C (-320degree F)
  • Made from state-of-the-art waterproof materials that are lightweight for comfort and ease of movement
  • Multiple lengths available for maximum safety
  • Adjustable straps at the neck & waist to ensure proper fit
  • Quick-release buckles at the neck and waist for swift on/off function
  • Standards: EU for CE Cat. III: EN 511, EN 388, EN ISO 13688
  • Application: Dispensing/transferring cryogenic liquid from storage tanks

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

S-SAFE''''s aluminized aprons reflect up to 95% of radiant energy while protecting from sparks and molten metal splash. These bib-style heat resistant aprons are specifically engineered to maximize mobility and ease of use while maximizing safety and heat protection.

Using :normally used for protection in high degree temperature ,glass industrial ,metal industrial ,oil industrial, fire protection etc could be protect against  1000 degree .

Aluminized aprons are available in 2 sizes:

• Medium: 24" wide x 36" long (61 cm x 91 cm)
• Large: 29" wide x 42" long (74 cm x 107 cm)

Product Details:

Product Description :-

Aegis Workwear International produce very unique design of 100% Cotton Boiler Suit made by 100% Cotton Fabric along with Reflective Tape which is so comfortable to the wearer.

Feature:
Mass: 240 GSM
Weave: Twill

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Product Specification

The outlook of Industrial safety has changed abruptly in the fourth quarter of the last century. Labours are provided with latest equipment and safety tools carefully designed for specific end user. Handling hot metal parts, working in hot enviornment or in our area where inflammable chemicals are either produced or handled. Previously, chemically treated cotton uniforms were used but they were expensive, FR property declining with every washing, even their life was unusually less. ARAMID which is an aromatic Nylon which has Flame Retardant properties by virtue of chemical synthesis. This also helps in insulating properties. Hence the garments made from this fibre exhibits very high standards of Flame Retardancy for the full life of garments.

FEATURES :

• High protective collar with throat guard
• Front zip closure covered by storm flap
• Tab for Radio
• Chest pocket, two thigh pockets
• Single layer unlined
• Elastic in back waist
• Pen pocket on left sleeve
• Epaulettes on shoulders
• 3M flame resistant retroreflective tape
• Silver colour
• All seams topstitched
• All stress points bar-tacked

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Flame Retardant Fabric / Garments

Flame 100% Cotton fabric is treated with chemicals to impart Durable Flame Retardant (FR) properties as per Textiles Committee's process. Chemicals react with Cellulose to form a permanent bond. There is no adverse effect to the Self extinguishingwearer'sSelf-extinguishing property avoids further damage. FR Fabric is used for the workwear like overall, Coats, & Trouser.

Flame Retardant Overall

Flame Retardant Overall is an industrial Garment with full body and long sleeves, Five Pockets, Heat Proof Button or Zipper are used as Front Closer. Sizes available as required.

Flame Retardant Coat

Full Sleeves Coat with 2/3 pocket & heat resistant Buttons.
Size: Small, Medium, Large.

Flame Retardant Trousers

Trousers with 2 side & 1 heap Pocket.
Front Button Closer.

Flame Retardant Apron

Kitchen type Apron with string to tie at waist.

Applications

These types of Garments are used as a protective workwear in Foundries, Metal Fabricating Sheds, Welding Area, Fire Fighting, Cooks Apron & Military Uniforms.

Fabric can be treated with FR Chemicals & Used for furnishing Home, Hotels, Theatres etc.

Product Details:

Outer layer of 545gsm Gentex “Dual Mirror”® aluminised glass fabric with inner 182gsm nylon taffeta/neoprene steam barrier and additional 160gsm Thermal glass barrier with aluminium foil. 100% aluminium surface for maximum radiant heat reflectivity.

Steam barrier allows use in areas where steam or hot moisture is a risk. Inner thermal barrier provides high level protection against radiant heat.

• EN Class 4 Radiant Heat protection: (Time to 24oC rise in temperature behind fabric – >600s: Class 4 is highest class: threshold = 95s).
• Also tested for convective and contact heat plus molten metal drip.

Product Details:

The same unique TYCHEM/ TYVEK suit can be coupled with Airline system to provide you with a very economical but high protective suit providing body and Respiratory protection.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Features:

• Made out of aluminized fiberglass fabric with fire retardant lining
• Apron is stitched with Kevlar thread
• It is back open style with collar & full sleeves
• Length: 42 long
• We can customize the size, length & pattern of apron as per client requirement
• Make: S-Safe

Product Details:

Product Details:

Product Details:

Specifications: 

• Made out of waterproof outside material with inside lining
• This suit is specially designed for hot steam operation work
• We can customize the suit and inside lining as per work operation
• Available in coat, pant, coverall style

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

PRODUCT DESCRIPTION

Delivering protection from errant sparks and heat Nomex hoods are an essential in steel, aluminum glass, forestry and other industries requiring spark protection. The white hood is made of a knitted Nomex/Lenzing blend with a double layer on the hood and a double layer on the bib. Nomex provides good heat and flame resistance with soft comfort and excellent absorbency. Material is UL Certified NFPA 1971.

• Raven Industrial Supply  415119

Product Details:

Coverall with concealed zipped on front pocket.
Chest pockets fastened by zipper.
Side elasticated waistband.
Two back patch pockets.
100% cotton.
210 gsm.
Regular light weight coverall.
Rally style.
metal zipper in front with 2 way puller.
Chest pockets on both sides with metal zipper closure.
Side elasticized waistband.
Sleeve opening with snap button adjuster.
Two side pockets and side slit opening.
Action back pleats for ease of movements.
Two back patch pockets and a tool pocket.
High on comfort.
Ideal for light weight industrial works.
Sizes Available: XS-XXXL
Available colors: Navy Blue, Royal Blue, Khaki, Bottle Green, Red, Grey, White, Orange.

Product Details:

Grey split Leather

Velcro fastening for quick and easy fitting and removal

Protects footwear from welding spatter

Product Details:

Welder Suit. Manufactured using high grade fabrics, these suits provide complete protection as these are fire resistant. The offered range is widely demanded in construction and welding industries as these are very comfortable to wear and very effective. Post-production, these Welder Suit are stringently inspected on certain parameters of quality in order to rule out every possibility of defect.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

The Sand Blasting Suit and gauntlet-style leather gloves protect the blast operator from the impact of rebounding abrasive. Heavy cotton fabric on back of suit allows air to circulate, while fronts of arms and legs are protected by leather panels. Straps at cuffs adjust to fit, keeping out dust and abrasive. The red color stands out in a blast environment. It is lighter in weight than all-leather or all-rubber suits. (Optional gauntlet gloves protect hands and wrists.)
Features:

• Freezer suit is ideal for cold storage work
• Outer layer made out of polyster material with inside thermal lining
• Consist of coat, pant, monkey cap, gloves & booties
• Suitable for temp: -25 deg

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Polyester Tafatta with virgin PVC linning of 0.15mm thickness

 

Reversible use.

 

Jacket, Pant and cap

 

Hood with draw-string closure

 

Two concealed Pockets.

 

Chest fastened by Buttons with single flap cover and zipper at the center.

 

Waist adjusted by elasticised waistband.

 

High visibility Reflective tape on back for safety at night .

 

Convenient Pouch packing.

 

Colors : Assorted

 

Size : Free Size

 

Product Details:

PLASTIC FABRIC : Virgin PVC With 0.18mm thickness

 

High visibility Reflective Tape On front and back safety at night.

 

Jacket, pant and cap

 

Hood With draw-string closure

 

Two Pockets on the front.

 

Chest Fastened by premium grade virgin plastic zipper with flap cover.

 

waist adjusted by elasticised Waistband.

 

Convenient Pouch Packing.

 

COLOR : Bright Yellow

 

Size : Free Size

Product Details:

Product Features:

• Antistatic or non Antistatic
• Made from Asbestos fabric with heavy duty flannel lining pasted with synthetic solution.
• It is a one piece overall with Hood, pair of Hand Gloves and Safety Shoes with leather sole.
• Available in three qualities i.e. S -20, AMC -41 and AMC -45.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

With rich industry experience, our company is engaged in offering Disposable Apron. Manufactured using degradable plastic as per the international standards, this product is available with the option of sterilizing for maintaining complete hygiene & cleanliness. Our offered range of sterile/non sterile disposable  apron provides protection against various contagious diseases and is immensely demanded in various hospitals, healthcare centers, laboratories, etc. Durability, higher tensile strength and tear resistance are the key features of this product.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Leather Leg Guard & Sleeves. These sleeves are made and designed using quality approved heavy split leather at our modern machining facility as per safety standard laid down by industries. Best known for their high tear resistance, durable finish and rugged design, our Leather Leg Guard & Sleeves are worn by employee during welding and cutting job works. In addition, we offer these guards quality packaging to avoid damage during transportation.

Specifications:

 

• Leg guard/Legging --- Size 16" & 18"

• Appron ----- Size 24" X 36", 24" X 42"

• Sleeves ---- Size 14" to 22".

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Description

This 3-layer jacket/coverall features a polyster / spandex outer layer with a TPU membrane. The polyster lining includes polyster insulation and a snow/wind skirt.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Product Details:

Features:

• Made out of neoprene material (5mm thickness)
• Comes with retro reflective tape
• Universal size
• Colour: Red
• Solas approved
• Make: Lalizas

Product Details:

With rich industry experience, our company is engaged in offering PVC Apron. Manufactured using degradable plastic as per the international standards, this product is available with the option of sterilizing for maintaining complete hygiene & cleanliness. Our offered range of sterile/non sterile disposable P.V.C. apron provides protection against various contagious diseases and is immensely demanded in various hospitals, healthcare centers, laboratories, etc. Durability, higher tensile strength and tear resistance are the key features of this product.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Made up of antistatic material, lint free polyester & braided with carbon thread meshing.
It is completly sealed one piece with a hood. It has a chest zip and zips on ankles, also bee gloves & boots.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Bib apron for the culinary.
Adjustable strings attached.
Ideal for hospitality industry.
Available in different sizes.

Product Details:

• Made out of aluminized fiberglass fabric with fire retardant lining
• Apron is stitched with Kevlar thread
• It is back open style with collar & full sleeves
• Length: 42" long
• We can customize the size, length & pattern of apron as per client requirement
• Make: "S-Safe"